robot army

Light Play

Maker Faire 2015

I’ve been home for almost two weeks now from our Bay Area pilgrimage and life has pretty much reset. I rewarded myself by binge playing Starbound all weekend and partaking in other mindless immersive activities I’ve been too busy to enjoy so far this year. It was a nice break. But back to work! I’m going to close this chapter by recapping our big adventure: Over all, Maker Faire went firkin awesome! Last year = shitty location + loud tesla coils + high maintenance demo + no place to escape for peace and quiet. Since we had ample time to plan, we eliminated all these stress points! TRANSPORTATION Our project this year was three times bigger than before at 84 individual nodes, so smashing them in the back of Mark’s Kia wasn’t an option. We didn’t quite have the money to spend on buying our own permanent trailer either, so for this trip we rented…

Light Play

Light Play : Half Way There

I’m tired. I will forever look at big art installations and wonder with silent reverence if there were two people at some point sitting on their couch at three in the morning assembling parts to the thing by hand. Any how… WE’RE HALF WAY THERE! Two days ago everything came together at last. One by one we tested and plugged the new babies into their happy little nests. We even named a whole pallet after our favorite characters from Create TV, which we’ve had on in the background while doing a lot of the manual labor. Long story short, Mark fired up his Netbeans GUI and everything just worked. With a little tweaking over the weekend we got the 42 little ones to behave more or less like we were imagining. Mark even figure out how to turn off the stupid thing in the Kinect example code that waits for a hand wave…

Light Play

Light Play : Brains Nerves and Butts

This past weekend Mark and I got a bunch more work done for the installation. We finished glueing and painting all the shiny black honeycomb pallets, so all twelve of them are now stacked neatly waiting to receive delta babies. …which means we need to build lots… and LOTs of delta babies. Thankfully, as I sit here and write this, that part is mostly done. For the past week or so the living room has transformed into a birthing chamber of plastic bins and Create TV. At an average of 15-20 minutes a piece, we built around 50ish more base assemblies. That’s the acrylic bit with the three motors attached. Obviously, they aren’t full deltas yet. They’re missing their snazzy yellow arms and blinky LED on top, but we wanted to get the hard part out-of-the-way first. The next step is to calibrate all of these little delta butts, and then screw all the grey…

Light Play

Light Play : Spawning for Maker Faire

Maker Faire in San Mateo is imminent! Last year my partner Mark and I showed an installation of 30 delta robots which mimicked the physical gestures of people. All of the robots however did the exact same thing… which was impressive if you’ve never seen them before, but hardly to the extent of awesome I have in mind for the project. Though we’ve been working hard, Light Play still has a long way to go development-wise. Until they’re feeding off neural input and hopping through cities in flocks, I’m continuing to slowly expand our numbers. For now, that number is 84, which doesn’t seem like a whole lot in the face of the thousand I dream of having… yet as I sit on the couch night after night building these little monsters, 84 feels plenty enough to my calloused finger-tips: This is what takes the most time to assemble. The motors mounted to their…

Jelly

jellyBot : Rolley (the second prototype)

Ok, so the proof of concept I worked on back in October looked awesome, but it couldn’t really move on its own… and there were a couple of reasons why: I had mounted standard servos on the drive shaft instead of the continuous rotation type. I found out you need more than a breadth of 180 degrees to make a rack and pinion move far enough to do anything useful! Also, my drive shaft needed some roller bearings to tension the rack down onto the pinion in order to stop all the slippage. Since both of these things involve the mount of the motors specifically, I took the time to completely redesign that whole part to be more solid in general… after all, it is the very core of the robot- therefore the most important part! Tighter tolerances = happy jelly. So what I ended up making was a set of brackets that both…

Light Play

Robot Army : Final Stretch

There was an old woman who lived in a shoe… who had so many deltas she didn’t know what to do. So she put them in boxes and shipped them away, to twelve different countries so they could revolt and take over the world one day… hehe. We’ve shipped about 150 kits at this point. The poor printer has been running at a minimum of ten hours ever single day for the past six months and I’m starting to feel like I should buy it a drink or something. I estimate we should be sending the last troops out to their perspective families within the next 2-3 weeks. That means this whole Kickstarter process from the brainstorming of the campaign all the way to the end has taken one whole year: November to November ( ! ). The eBook : The final thing I need to do once all is said and…

Jelly

jellyBot : Racky All in one Piece

This weekend I started printing the newly redesigned pieces for my jellyfish robot. I got about 90% finished by Sunday, but not enough was intact to start testing out whether or not the design will move like it should. Yesterday, I scraped together the short end pieces leftover from old roles of filament to finish printing the rest of the tiny arms for Racky. Now that I’ve added a slight curve to the length in addition to the U joint at one end, it was a pain deciding how to print the piece without ended up with a pile of pelvic fur. I had to position it rocketing off the build plate with some support material, which had a 50% success rate, (which sucked as I was nearly out of yellow). In spite of the failed attempts, I got them all done… just in the knick of filament : Once these small arms were added to the body, I needed to come up with a…

Jelly

My New jellyBot Prototype, Racky

  About a year ago I started building a robotic jellyfish inspired by Festo’s submergible AquaJelly. I was just beginning to figure out how to get the thing moving when I got sidetracked with the prospect of launching a Kickstarter campaign and dropped the project cold. During this whole long year while I’ve been fulfilling the said Kickstarter, this poor jelly prototype (“Boney”) has watched silently from a distant shelf in the workroom, begging me to pick it up again. Finally this weekend I was able to spend some time giving the old parts a makeover… in yellow. I added a nice gentle curve to the moving pieces, taking after the design of its cousins, the delta robots : Last year I decided to use a rack and pinion to get the parts to move in leu of Festo’s fancy linear actuator that they showcase in their model. Never having used, let alone designed a working rack…

Light Play

Robot Army : Shipping at Last

Much to my dismay… I woke up last week to find that it was September. While I struggle to remember where the summer went, I think I’ll make myself a cup of chai and recap whats been going on in the past month or so. The most exciting thing to take place was our dry run at SYN Shop. We invited a small number of people who preordered kits back in February to be the first to pick up their newly adopted robots in exchange for testing out our instructions. Everything went smoothy, however I’m still sitting here editing the instructions… and I’m tired of looking at them. ::shakes fist:: As much as I thought I had boiled down the steps… I need to expand several of them out even more to make absolute sure that people can’t skip or misread them. It’s taxing >.< I definitely need to do a…

DefCon Projects

DefCon 22

Sunday evening I collapsed on the couch with a nice big glass of red wine after having unloaded the very last of our stuff back into the house… thankful that I’m alive, in one piece, and that nothing critical went wrong this weekend. I have more awesome memories for the grey squishy hard drive. Here are the highlights on a few of my experiences : Our Kids’ Second Big Recital >.< DELTAS! They were there! This being our second time attending the con, we wanted to participate by bringing our own taste to the medicine. Friday night during the event of random fun and mischief, we had a nice dark sliver of space to set up all of our babies in. The best part being that we didn’t have any rules or restrictions for the space we were showing in like at Maker Faire. We could pretty much do anything we wanted; our own cooler filled with…