Fifth Element Mood Stones

Fifth Element Mood Stones

Elemental Mood Lighting : Just Add Love

We probably shouldn’t have taken on this side project amidst all the pressure to prepare on time for our display at Maker Faire, however I’m glad we have this awesome life relic to show for it! Since my last update, I took the four complete 3D printed stones and gave their surface a rather sharp makeover. All those years in art school came in handy again. It surprises me just how many techies have never heard of gesso … so I’m tapping this apparent art secret for the sake of painting on an otherwise stubborn surface. ABS will take acrylic paint, however instead of priming it with anything you might get from Home Depot in the paint section… you can go to Blick and grab a pint of clear gesso (canvas primer). It may be a little more expensive, but it’s less volatile, doesn’t have any fumes, and has the best tooth when…

Fifth Element Mood Stones

Elemental Mood Lighting : The Moving Bits

First I have to show off how nicely the prints turned out! Some of these larger pieces were printed over night for nine-hour periods and were completed without fail (which is surprising). In the morning there would be a loaf of stone sitting on the printer bed : Mark is responsible for creating these seamless linear designs on the face of the stones : We ran out of natural filament by the time we got to the ‘wind’ stone, so it’s in a silver/gray color instead. This one was printed last because unlike the other three stones, its design is on the upper portion which overlaps the wedge pieces that pop out. It called for a little more fuss and planning when designed : Over all, I’m extremely pleased with how they look so far. I can’t wait to paint them though….! I spent most of this past weekend getting the mechanical parts in…

Fifth Element Mood Stones

Fifth Element Stone Mood Lighting

Now that we’ve ordered all of our bits, pieces, nics, knacks, and parts for Maker Faire… Mark and I are left with a brief lull while we wait for things to show up. Instead of relaxing, we decided to do a ‘weekend’ project to fill the time.  The Sci-fi contest Hackaday is holding right now seemed like the perfect thing to overt our attention to, yet keep us sharp and in our maker headspace. As such… we’ve chosen to make a sic-fi themed prop from my personal favorite sci-fi, The Fifth Element. This same article can be found on my hackaday.io page for this project here : The Earth Stone First of all, if you haven’t seen The Fifth Element, all you need to know is that we’re making replicas of these fancy things below which will operate with mechanical and electrical parts instead of spooky earth magic like in the movie =] Mark and I decided that regardless…