maker – ROBOHEMIAN

Light Play

Light Play : Spawning for Maker Faire

April 1, 2015spetku2 Comments

Maker Faire in San Mateo is imminent! Last year my partner Mark and I showed an installation of 30 delta robots which mimicked the physical gestures of people. All of the robots however did the exact same thing… which was impressive if you’ve never seen them before, but hardly to the extent of awesome I have in mind for the project. Though we’ve been working hard, Light Play still has a long way to go development-wise. Until they’re feeding off neural input and hopping through cities in flocks, I’m continuing to slowly expand our numbers. For now, that number is 84, which doesn’t seem like a whole lot in the face of the thousand I dream of having… yet as I sit on the couch night after night building these little monsters, 84 feels plenty enough to my calloused finger-tips: This is what takes the most time to assemble. The motors mounted to their…

Light Play

Robot Army : Brains!

July 17, 2014spetku2 Comments

Ok, I feel warm and fluffy right now… in a nostalgic sense. Our brain boards just came in the mail this morning from OSH Park. This was one of the last big checklist items that we were waiting on. The box contained over 300 little hexagons and deceptively weighed more than I was expecting. As I opened it and laid the sheets of royal purple and gold across the table I relived the memory of sitting at SYN Shop sometime last summer when I drew this : This was the first brain sketch. It would be the fourth board I ever designed in Eagle, and the very first I would ever send away to have professionally fabricated : Since then Mark, with all of his engineering prowess, has taken over the task and made an even better brain for the deltas. It’s taken us five revisions to get it just right… Along the…

Light Play

Robot Army : Production Mode + Lime Light

June 18, 2014spetku5 Comments

Mark and I are FACTORY Now that the hype and excitement of Maker Faire has passed, we’ve buckled down and gone headlong into Fulfillment mode. Last week we started bagging things, like steel balls and hardware : The acrylic base pieces are in a cue to be fabricated, and our Rev. E brain boards will be sent in sometime this week once we verify that these- yes THESE are the final rendition to be included in the kit. Our friend Andrew from SYN Shop is also helping us mass produce our parts on his fleet of 3D printers. The production of the robot parts is what will potentially push shipment back the most. Luckily though, Andrew also taught us how to make use of our second extruder so that we can print the same amount of parts in half the time. Since we’re getting twice as many parts in a day as we…

General Stuff

Bunny Slippers of Death

March 23, 2014spetku0 Comments

My birthday was this past week and Mark made me something so frekkin awesome that I had to write a post to share it. First of all, we all know gifts that are made are far better than gifts which are bought. Gifts are even better still when they were made with inspiration from something you did… in this case, a drawing I made that Mark pulled into reality with his craftsman/techie prowess! BEHOLD. Bunny feet of death : Mark collaborated on these with his awesomely talented friend from work, Emily Wiersma… who designed the ears, which she engineered to stand up and hold their shape when worn, as well as the adorable bunny faces! Mark created the eyes, which are 3D printed compartments that hold both a power supply and tiny SMT LED! I drew these almost a year ago back when I first started planning the Robot Army…

Light Play

Robot Army : Printing + Drinking

March 20, 2014spetku2 Comments

Nitrogen Capsules = LED Diffusers Here’s a St. Patricks Day story for those of you who are into that sort of thing. As you might have gathered, Mark and I like to drink beer while we work. Lately our brew of choice has been Guinness. We’ve been so busy now that we’re in fulfillment mode that we’ve neglected to haul our empty beer cans from the past two or three weeks to the curb. There is a mound of them piled in the corner of the kitchen waiting to be tripped over. In short, we haven’t had any luck finding a more reasonably priced lens to go over the LED of our robots. The one we had found, though perfect in size and shape is freakishly expensive (We’re talking several times more than the amount we allocated for that part on our BOM). We had given up on finding a…

General Stuff

Robot Army : Entering Phase 3

March 9, 2014spetku0 Comments

Fremont Street Procession To celebrate our first successful Kickstarter campaign, Mark and I threw a soiree at SYN Shop with our close friends. Much to our surprise, everyone brought liquor! Nerds drink? Heh. Once good and numb they toted me down Fremont Street with one of my robots in a royal procession on our friend Bill’s newly crafted dolly. I can’t believe this happened… the experience was surreal (Thank you guys for making me feel special!). The video explains the night better than I can : The War Room No one can mastermind a scheme for world domination without a proper war room to do it all in. During this first week since the end of our Kickstarter, we’ve transformed Mark’s workspace into a factory. We fashioned a 4′ x 8′ sheet of wood into a painted, polished table complete with central two tier hutch and power outlets (oh, and speakers of…

Light Play

Robot Army : Final Stretch

February 24, 2014spetku0 Comments

It was fun having our Kickstarter in tandem with the Olympics. It felt like we were participating in our own sort of event. As I watched the closing ceremony last night, I felt sadness because I knew our ship is setting sail soon and I’m at the point where all I can really do is sit tight and wave goodbye. We have less than a week left and I don’t want it to end. It feels like much more could have been done in regard to press, but Mark assures me that PR is sort of like the lottery. If I could accept that I’d stop banging my head over it like I’ve been doing, but alas… it seems I can’t. tehe. Our campaign has been an exciting experience over all. Now that we’re switching gears from messy uncontrolled busy to just plain busy, I’ll be able to do some…

Light Play

Robot Army : Our First Rush

February 6, 2014spetku0 Comments

There were some experiences involved with launching a Kickstarter that I had been heavily anticipating. The most obvious of which being the excitement that follows your first big rush of backers. – Sort of like Christmas, but in the form of a global affirmation that your ideas are liked, understood, and that there is a place in the world for people who dare to seize their dreams. Though Mark and I were off to a respectable start… our momentum pittered out rather quickly and for a good day and a half we crawled through six or seven percent. It was agonizing. Maybe we were expecting too much. Since we haven’t yet been picked up by any major feeds, its been a matter of sitting in front of the laptop every morning and kindly reminding/begging people to post about our project and help us get the word out. After blasting yet…

Light Play

Robot Army : LAUNCH!

February 1, 2014spetku3 Comments

In spite of all of the things that looked like they were going to delay us, we got approved in time for our February 1st deadline and launch at midnight! ON TIME! (WOOOO!!!!) CHECK IT OUT! : ROBOT ARMY STARTER KIT Today has been exhausting. We’ve been blasting all of the social channels and so far things are off to a pretty promising start… although Mark and I are both running on empty. We were up until close to 3am last night because we were too excited to sleep. It’s taken everything we’ve got not to just sit and hit the refresh button on our KS page all day long… so we’re getting stuff done at the shop… like set up a nice display in the window. We plan to make it look like a pet shop window, with graph paper shaving and food bowls filled with scrap electronics… so…

Light Play

Robot Army : Video Done… sigh…

January 26, 2014spetku1 Comment

It’s done. We filmed close to 100gb of video footage and ended up using less than a percent of that. We story boarded, scripted, tried various locations, and in the end chose the most simple three-minute segment that told the bare minimum about our project. It felt the best, flowed naturally, and isn’t so long that you’d stop watching in the middle of it. So I guess we succeeded. Here it is ^ Now that we’re over that hurdle, on to the next headache. In order to launch a project, Kickstarter requires that you have an Amazon business account to transfer money into once you’re funded. This is all well and good. Mark and I got our corporation made, filed for our EIN and were about to get everything underway with Amazon- however for reasons unknown there was a discrepancy with our tax information (or something???) and we got locked…